Ashirvad - - » CPVC Fittings

CPVC Fittings

ASHIRVAD FLOWGUARD CPVC fittings are injection molded and are available in full range from :
1) Sizes ½" to 2" in CTS (Copper Tube Sizes) as per ASTMD 2846 pipes in SDR 11 & 13.5 and fittings in SDR 11
2) Sizes 2 ½" to 4" A) Pipes in Sch 40 & Sch 80 as per ASTM F 441 B) Fittings in Sch 80 as per ASTM F - 439



Quality Control Procedures:

For Pipe

1. Dimensional Tests: To ensure that all dimensions confirm to appropriate standards.
2. Flattening Test: Sample Pipe are compressed to check that despite compression Pipe do not crack.
3. Burst Pressure test: Ensures maximum internal pressure to be over three times normal pressure rating for the pipe.
4. Drop impart Test: Ensures weights dropped on to the pipe, without cracks or failures.
5. Heat Reversion Test: Ensures residual stresses left in pipe after the pipe is produced.


For Fittings

1. Dimensional Test: Ensures correctness of dimensions for wall thickness, socket diameters and socket depths as per relevant standards.
2. Burst Pressure Test: Ensures maximum burst pressure of fittings must be over three times the normal pressure rating.



Fittings | Comparision | Approved by | Easy Installation